Provide a border-leaf IP (on which
the VRF is instantiated) for the VRF SR-BFD (Static Route – BFD)
configuration.
About this task
Follow this procedure to configure a
static route BFD on tenant VRF.
Procedure
-
To configure static route BFD on
Tenant VRF when you create a VRF, run the following command:
efa tenant vrf create --name <vrf-name> --tenant <tenant-name>
--ipv6-static-route-bfd <border-leaf-ip, destination-ip, source-ip, bfd-min-tx, bfd-min-rx, bfd-multiplier>
--ipv4-static-route-bfd <border-leaf-ip, destination-ip, source-ip, bfd-min-tx, bfd-min-rx, bfd-multiplier>
-
To configure static route BFD on
Tenant VRF when you create a VRF, run the following command:
efa tenant vrf update –name <vrf-name> --tenant <tenant-name>
--operation <static-route-bfd-add|static-route-bfd-delete>
--ipv6-static-route-bfd <border-leaf-ip, destination-ip, source-ip, bfd-min-tx, bfd-min-rx, bfd-multiplier>
--ipv4static-route-bfd <border-leaf-ip, destination-ip, source-ip, bfd-min-tx, bfd-min-rx, bfd-multiplier>
Example
The following example creates static
route BFD on tenant
VRF:
efa tenant vrf create --name VRF1 --tenant tenant1
--ipv6-static-route-bfd BL1-IP,1001::2,1001::1,100,200,5
--ipv6-static-route-bfd BL2-IP,1011::2,1011::1,100,200,5
--ipv6-static-route-bfd BL1-IP,1002::2, 1002::1
--ipv6-static-route-bfd BL2-IP,1012::2, 1012::1
--ipv4-static-route-bfd BL1-IP,13.0.0.1,13.0.0.9,200,300,6
--ipv4-static-route-bfd BL2-IP,13.0.1.1,13.0.1.9,200,300,6
--ipv4-static-route-bfd BL1-IP,13.0.0.2,13.0.0.10
--ipv4-static-route-bfd BL2-IP,13.0.1.2,13.0.1.10
